Magnetrol 2xx Manual de instrucciones descargar pdf (Pagina 23)

TRANSMITTER SPECIFICATIONS

PROBE SPECIFICATIONS

PERFORMANCE

A complete measuring system consists of:

1. Jupiter 200: transmitter and probe (MLI or cages as shown in this bulletin are not included).

2. OPTION: secondary ﬂoat for interface applications (specify S.G. for lower liquid).

3. OPTION: ATLAS

. Magnetic level indicator for use with Jupiter 200, external mount model. Consult bulletin 46-138.

4. Free of charge: Magnetrol master C.D. with Jupiter 200 DTM (PACT

war e

). Order code: 090-BE59-200 (included in each

order).

MODEL IDENTIFICATION

Description Speciﬁcation

Accuracy ± 0,4 mm (0.015")

Repeatability ± 0,005 % of full span or 0,13 mm (0.005") – whichever is greater

Linearity ± 0,020 % of full span or 0,79 mm (0.031") – whichever is greater

Max ﬁll / drain rate 9 m/min (30 ft/min)

Response Time < 0,1 second

Warm-up Time < 5 seconds

Ambient Temp. -20 °C to +70 °C (-5 °F to +160 °F)

Humidity 0-99 %, non-condensing

Electromagnetic Compatibility Meets CE requirements (EN-61000-6-4, EN 61000-6-2)

Description Speciﬁcation

Materials Probe 316/316L (1.4401/1.4404) standard or electropolished ﬁnish

Hastelloy C

(2.4819) or Monel

(2.4360)

Float 316 (1.4401), 316L (1.4404), Titanium or Hastelloy C

(2.4819)

Process seal None, welded construction

Probe diameter 16 mm (0.63")

Float diameter

(for direct insertion models only)

Min 47 mm (1.85") – max 65 mm (2.55")

see partnumber on page 7

Probe length Min 15 cm (6") – max 570 cm (224") selectable per 1 cm increments

Dead band Upper Direct insertion model: 50 mm (2").

External mount model: depending conﬁguration.

Bottom 50 mm (2") – for units with standard electronics and single ﬂoat

152 mm (6") – for units with standard electronics and dual ﬂoats

Inactive zone - bottom 127 mm (5") – for units with SIL enhanced electronics

Process

temperature

Direct insertion -40 °C to +95 °C (-40 °F to +200 °F) – standard probe

-40

C to +260

C (-40 °F to +500 °F) – high temperature probe

External mount -40

°C to +120 °C (-40 °F to +250 °F) – standard

-196 °C to +455 °C (-320 °F to +850 °F) – with factory insulated MLI

Process

Pressure

➀

316 and 316L Max 22,8 bar @ +40 °C (330 psig @ 100 °F)

Titanium Max 26,2 bar @ +40 °C (380 psig @ 100 °F)

Hastelloy C Max 18,6 bar @ +40 °C (270 psig @ 100 °F)

Vacuum service Full vacuum

➀

Consult factory for higher pressure (custom ﬂoat).

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Comentarios a estos manuales

Sin comentarios

Magnetrol 2xx Manual de instrucciones Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Magnetrol 2xx